|
|
Infrastructural
Facilities
|
We operate from our own spacious
premises in an Industrial Estate in Vadodara. We have established complete
facilities for production, testing and servicing of solar devices.
|
| |
Sheet
Metal Shop : This is where we carry out the marking,
shearing and bending of the tank outers, collector boxes etc. |
| |
Light Fabrication Shop : Welding
of our Copper tanks, Stainless Steel tanks and Aluminium Collectors are
carried out here. Modern Argon Welding facility is used to weld the SS
tanks, while the Copper tanks are welded using Oxy-Acetylene welding facility.
A constant check is maintained in order to keep the tanks and collectors
within conformance limits. |
| |
Heavy Fabrication
Shop : The thick,
high capacity Industrial tanks are manufactured here. These are manufactured
from MS , SS 304, SS 316 etc depending on the
specifications of the customer. |
| |
Pre-Treatment
Plant :
It’s
a 7 stage solar powered treatment plant, this process is carried out before
powder coating operation to remove all traces of dirt, rust and oil so
that you get a high quality powder coated surface which lasts for a long
time. |
| Powder Coating Plant : We carry out
powder coating in a special dust free chamber, using the latest electronic
powder coating machine. This enables us to give you clean, scratch-resistant
coatings with unparalleled finish. |
| Baking Oven : A large Electronically
Operated Powder Coating Oven is dedicated to the sole purpose of baking
the freshly powder sprayed items at 250 degree Centigrade, so as to get
a hard powdered coating which is tough and scratch resistant. |
| Testing Facilities : |
| |
Pressure
testing : Each and every
tank and collector manufactured by us is tested at higher than the usual
operating pressures, so that you get completely leak proof collectors only. |
| Glass testing :
We use the best possible Toughened Glass with a transmissivity of 0.85%
or higher only, so as not to compromise
on performance or strength. The transmissivity and toughness of the glass
is tested prior to use. |
| Testing of our painted products : All the powdered
coated collectors and tank outers are tested for paint quality and thickness,
giving it the finish and the appeal you desire. |
| Testing of Rubber products :
The rubber gaskets and flanges are tested at 120 degrees Centigrade to
make sure that they
don’t deform at high operating temperatures thus ensuring longer
system life. |
| Testing of Pre-Treatment plant chemicals : Even
the chemicals used for the pre-treatment before the powder coating are
checked regularly for concentration and composition. |
| Performance Test setup as per BIS guidelines and requirements to carry out inhouse testing |
| |
|
|
Site Updated : June 1, 2008
 Copyrighted NRG Technologists Pvt Ltd.
|
|
